Top 3 Best Transmission Jack You Should Try (Comparison Included)

A transmission jack is an inevitable tool during installation or removal of a transmission in a vehicle. A transmission in simple terms can be referred to as the gearbox. The jack is designed in a special way particularly for this purpose. Mechanics and other professionals require this tool to hold, lower and lift transmissions. It is placed strategically on the central position to safely handle the transmission. To buy the best transmission jack, it is important to consider the capacity of weight it can hold and its safety in-order.

Hydraulic transmission jacks are used in removing and installing automotive transmission systems. Unlike hydraulic jacks, floor jacks are commonly used in car shops or workshops to lift a part of the whole vehicle. They allow repairs to be done underneath the vehicle swiftly.

High lift transmission jack is manufactured with a lift placed on hydraulic base. This jack is commonly used for highly lifted vehicles such as large trucks. The vehicles are usually raised using a hydraulic lift because they are generally raised and therefore hard to use normal jacks. On the other hand, low profile transmission jack is commonly used to fit cars which are not raised off the ground. Mainly for cars raised with normal jack stands rather than lifts.

Here is a list of best transmission jacks to buy in 2019 and review on them.

1. Torin Big Red Telescoping Hydraulic Transmission floor jack
2. Torin Big Red Hydraulic Transmission Floor Jack
3. Sunsex 7793B 1/2- Ton Telescopic Transmission Jack

 

1. Torin Big Red Telescoping Hydraulic Transmission floor jack

 Powerful Features:  capacity of up to 1000 lbs with an adjustable saddle to fit any system.

Torin Big Red Telescoping Hydraulic Transmission floor jack

Special Features

  • Lift range of 49.6 inches to 68.7 inches
  • Safety chain tilts either side
  • Has 4-3 inch steel wheels rotating 360 degrees
  • Made of durable steel
  • ½ ton capacity

The Torin is the best transmission floor jack you can buy for your garage. This jack weighs 75 pounds and measures 26.6 x 16.6 x 6.6 inches. The whole pack is delivered in a box which has instructions for assembling as well as all the parts. It is highly recommended for people who love home servicing of their own vehicles.

The equipment is made of heavy and durable steel which makes it strong. To make it fine and attractive, the finishing is done through dipped enamel. The enamel finishing not only makes it good-looking but also protects the whole pack from rust.

The jack is designed in a way for both in and above- ground use. It comes in handy for removal or installation of both manual and automatic systems in light vehicles such as cars.

Click For Full Review

Its adjustable saddle allows it to fit different types of transmission systems or vehicles. This flexibility allows it to tilt both backward, forward and either side. On the saddle, there is a safety chain and brackets to secure the transmission. This jack handles systems of different designs and weights up to 1000 lbs.

The four-leg base made of steel makes it more stable and safer. Each leg has a 3-inch steel wheel capable of rotating 360 degrees with the aid of the in-made ball bearing casters. The wheels also ease the handling and movement of the jack. They enable the jack to slide under a hoisted vehicle without any force.

Pros
  • Simple and easy to assemble
  • Affordable
  • Stable
  • Feels secure
  • Flexible and adjustable
  • Light
  • Enamel finish
Cons
  • Slow pumping system
  • Not designed for commercial use

2.Torin Big Red Hydraulic Transmission Floor Jack

 Powerful Features:  built-in overload system and 100mpercent factory tested

Torin Big Red Hydraulic Transmission Floor Jack

Main features

  • Wide and reinforced base
  • Has an overload safety system
  • Steel swivel bearings
  • Weighs 9.06 pounds
  • 1000 lbs capacity
  • Maximum height of 22.64 inch
  • Tory tested

If you are looking for a reliable and safe transmission jack, check this one out. It has been tested in the factory and proven to 100 percent fit. Unlike the other jacks, this one has zero error margin which makes it a necessity in every industry or workshop dealing with transmission systems. With its hydraulic system, the jack can smoothly lift or lower a transmission not exceeding 1000 lbs.

The reinforced steel base gives you satisfaction while working. It can stretch to a maximum height of 22.64 inches beyond its minimum height of 8.66 inches. The overall dimensions of the jack measure 31.5 x 18.1 x 9.1 inches with a weight of 9.06 pounds. This is a reasonable size for a heavy-duty jack lift to ensure a mechanic works without fear of the equipment collapsing.

It features steel swivel bearing casters which make it easy to slide beneath a car. The easy movement and rotation make it easy to position it under the transmission. When using the jack, you do not have to worry about extra force or labor to push and position it at the exact spot.

Click For Full Review

The biggest advantage of having this jack is that you don’t have to worry about overloading and damages that come along with it. It is specially designed with an in-built overload safety system which bars use beyond its carrying capacity. The system automatically detects when the jack has been overloaded which prevents unexpected damages and loss. This saves you the cost of repair and maintenance. It the best transmission jack to use especially when you are not sure of the weight of your load.

It also has a handle capable of rotating 360 degrees with an adjustable saddle. The saddle can fully move to either side as well as back and forth. This allows precise handling of different designs of transmissions.

This product meets the American National Standards Institute or ANSI safety standards. This makes it the most recommended transmission floor jack for commercial and in -house use.

Pros
  • 100 percent tested in the factory for safety.
  • Very stable due to its wide stance
  • Easily movable
  • Adjustable saddle
  • Has a safety overload system
  • Can handle heavy duty tasks
  • 100 lbs capacity
  • Reliable
Cons
  • Poor Packaging

3. Sunex 7793B 1/2 -Ton Telescopic Transmission Jack

 Powerful Features:  Overload valve, foot pedal pump, 74-inch maximum height.

Sunex 7793B 1-2 -Ton Telescopic Transmission Jack

Unique features

  • Overload valve which prevents overloading
  • Weighs 0.48 ounces
  • 1000 lbs capacity
  • 1-year warranty
  • Extends reach to 74 inches
  • Has a nylon strap tie down mechanism
  • Telescopic rams ta allow moving of transmission to the table

While the Sunex 7793B may look like a general transmission jack, this model is among the best transmission jack. It can be used for multiple purposes ranging from installation, removal and also transportation of transmissions. The jack has an amazing height with the capability of stretching up to 74 inches. Mechanics can easily work under the vehicle without struggle or limitation of height. This allows the jack to reach any transmission of a vehicle on a lift.

Additionally, the jack has telescopic rams which allow the transmission to be easily moved and lowered to a table with its minimum height of 35.5 inches. A foot pump pedal allows slow and calculated release during lowering of the transmission. This trait enables the hands to be free and perform other tasks such as precise positioning. The foot pump also makes it easier to lift a load without using much effort.

The product dimensions are 27.2 x 14.2 x 39.4 inches. It can swiftly handle a load capacity of 1000 lbs. You will not have to worry about overloading the jack. The jack has an overload valve which plays a major role in preventing it from being used beyond its rated load. Accidents such as breaking and slipping which happen due to overloading are in this way controlled.

Click For Full Review

There is no need to hire more labor for holding the transmission in place. It has a saddle fitted with chain ties and nylon strap ties to secure the load. The saddle is universal and has adjustable angle brackets and ratcheting arms which can be configured to fit any size or design of a transmission. This product is also designed with a wide base which increases its stability. The base is fitted with swivel caster, polyurethane tread wheels which are extremely stable. They ease movement even when loaded an also during positioning. The two-locking wheel system allows the jack to stand still during removal or installation of the transmission.

Pros
  • Overload valve
  • 1-year warranty
  • Adjustable arms
  • Foot pedal
  • 74 inches maximum height
  • Stable
  • Easily movable
  • Ability to transport load.
  • Heavy Duty
Cons
  • Only suitable for vehicles lifted high above the ground.
  • Light

CONCLUSION

If you are a professional, then you definitely need a transmission jack in your workshop. A low profile transmission jack is ideal for low a car which does not need to be lifted on lifts.
Finally, if you need to buy the best transmission jack you will have to consider aspects such as lifting range, weight capacity, saddle pad, warranty as well as rollers and caters.